No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Tools 2.0 InfoCollect User Guide 33

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview

Overview

Run InfoCollect on a Windows PC or server and collect server management module, OS, and switch module logs. Ensure that the IP addresses of the management module, OS, and switch module are pingable.

If you want to connect your local PC directly to the MM910 using a network cable but the MGMT port on the active MM910 is already connected with a network cable, do not remove the network cable from the MGMT port on the active MM910. Otherwise, an active/standby switchover of the MM910s will be triggered, which may cause network interruption. You can connect the network cable from the local PC to the STACK port of the active MM910 in the chassis. If the STACK port on the active MM910 is also used, connect the network cable to an idle STACK port on an active MM910 in a chassis cascaded with the E9000 chassis.

  • Table 1-2 lists the OSs supported by this tool for log collection.
  • Table 1-3 lists the servers whose management module and switch module logs can be collected using this tool.
  • The management module log files collected by using InfoCollect are the same as the log files collected by running the one-click collection commands of the management module. For details, see Information Collection in the management module help.
  • The BMC log files collected by using InfoCollect are the same as the log files collected by running the BMC one-click collection commands. For details, see One-Click Info Collection in the BMC help.
  • For details about the OS log items that can be collected, see OS Log Collection Items.
  • Table 3-3 lists the E9000 switch module log files that can be collected and commands used to collect logs.
Table 3-3 Switch module log files

File

Command

Description

diag-info.txt

display diagnostic-information diag-info.txt

Display information

diagnostic_information.zip

collect diagnostic information

Diagnosis log file

log.log

-

Operation log

diag.log

-

Run log

NOTE:

Management module, OS, and switch module logs can be collected at the same time. The following describes how to collect them separately.

Translation
Download
Updated: 2019-08-31

Document ID: EDOC1000093346

Views: 62905

Downloads: 4815

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next