No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CH225 V3 Compute Node V100R001 User Guide 07

This document describes the appearance, functions, and structure of the CH225 V3 storage expansion compute node (CH225 V3 for short), and methods of installing, removing, and configuring the CH225 V3.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the Real-Time Desktop

Logging In to the Real-Time Desktop

This topic describes how to log in to the compute node through the web user interface (WebUI) of the management module.


Log in to the compute node through the webUI HMM Web of the management module.



  • The CH225 V3 is powered on.
  • You have logged in to the MM910 WebUI.
  • The compute node iBMC IP address cannot be on the network segment for the chassis management plane.


Data preparation is not required for this operation.


  1. Click KVM via MM.

    A Security Warning is displayed.

  2. Click Yes.

    The Warning-Security page is displayed.

  3. Click Yes.

    Enter remote KVM page, as shown in Figure 5-8.

    Figure 5-8 KVM page

  4. Click the compute node number.

    The real-time desktop of the compute node is displayed.

Updated: 2019-07-10

Document ID: EDOC1000095351

Views: 7910

Downloads: 74

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next