Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing and Installing CH225 V3 Components
This section describes the precautions and procedures for removing and installing the components of the CH225 V3.
- FRUs
- Component Removal and Installation Rules
- Removing a Hard Disk
- Installing a Hard Disk
- Removing the Cover
- Installing the Cover
- Removing a DIMM and Air Duct
- Installing a DIMM and Air Duct
- Removing a CPU
- Installing a CPU
- Removing the Supercapacitor
- Installing a Supercapacitor
- Removing the RAID Controller Card
- Installing a RAID Controller Card
- Removing a Mezz Card
- Installing a Mezz Card
- Removing the TPM
- Installing a TPM
- Removing the USB Flash Drive
- Installing a USB Flash Drive
- Removing a microSD Card
- Installing a microSD Card
- Removing a SATADOM
- Installing a SATADOM
- Removing a BIOS Battery
- Installing a BIOS Battery
- Removing the Mainboard and Compute Node Case
- Installing the Mainboard and Compute Node Case
Previous
