No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CH225 V3 Compute Node V100R001 User Guide 07

This document describes the appearance, functions, and structure of the CH225 V3 storage expansion compute node (CH225 V3 for short), and methods of installing, removing, and configuring the CH225 V3.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a SATADOM

Installing a SATADOM

This section describes the precautions and procedure for installing a SATADOM to a CH225 V3.

Scenarios

Install a SATADOM in either of the following scenarios:

  • A SATADOM fails.
  • A SATADOM is to be replaced with a new model.

Figure 8-80 shows the numbering and positions of the SATADOMs.

NOTE:

SATADOM1 and SATADOM2 correspond to Serial ATA Port2 and Serial ATA Port3 respectively in BIOS.

Figure 8-80 Numbering and positions of SATADOMs

Prerequisites

Conditions

Data

There is no special condition for this operation.

Tools

  • ESD wrist strap.
  • Packaging materials, for example, an ESD bag.

Hardware

Spare SATADOM.

Procedure

  1. Take the spare SATADOM out of its ESD bag.
  2. Connect the SATADOM to the connector, as shown in Figure 8-81.

    Figure 8-81 Installing a SATADOM

Verification

  1. Start the server. When the BIOS startup screen is displayed, press Delete to start the BIOS Setup Utility.
  2. Enter a BIOS password when prompted.
  3. Choose Advanced > PCH SATA Configuration and press Enter.

    Check the component information to verify whether the replacement is successful.

Translation
Download
Updated: 2019-07-10

Document ID: EDOC1000095351

Views: 6916

Downloads: 73

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next