No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CH225 V3 Compute Node V100R001 User Guide 07

This document describes the appearance, functions, and structure of the CH225 V3 storage expansion compute node (CH225 V3 for short), and methods of installing, removing, and configuring the CH225 V3.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing the RAID Controller Card

Removing the RAID Controller Card

This section describes the precautions and procedure for removing the RAID controller card from a CH225 V3.

Scenarios

Remove a RAID controller card in any of the following scenarios:

  • The RAID controller card is faulty.
  • The RAID controller card needs to be replaced by a newer model.

Figure 8-58 shows the position of the RAID controller card on the CH225 V3.

Figure 8-58 Position of the RAID controller card

Prerequisites

Conditions

Data

Data preparation is not required for this operation.

Tools

  • Electrostatic discharge (ESD) gloves.
  • M3 phillips screwdriver.
  • Packing materials, for example, ESD bag.

Procedure

  1. Determine whether the RAID controller card needs to be replaced.

  2. Use a Phillips screwdriver to remove the two screws that secure the RAID controller card. See step (1) in Figure 8-59.

    Figure 8-59 Removing a RAID controller card

  3. Lift the RAID controller card away from the connector on the mainboard. See step (2) in Figure 8-59.
  4. Place the removed RAID controller card in an ESD bag.
Translation
Download
Updated: 2019-07-10

Document ID: EDOC1000095351

Views: 7850

Downloads: 74

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next