No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CH225 V3 Compute Node V100R001 User Guide 07

This document describes the appearance, functions, and structure of the CH225 V3 storage expansion compute node (CH225 V3 for short), and methods of installing, removing, and configuring the CH225 V3.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the Cover

Installing the Cover

This section describes the precautions and procedure for installing the CH225 V3 cover.

Scenarios

Install the cover after replacing components in a CH225 V3.

Prerequisites

Conditions

Data

Data preparation is not required for this operation.

Tools

Electrostatic discharge (ESD) gloves.

Procedure

  1. Insert the bottom tabs of the cover into the matching slots in the CH225 V3 chassis, and place the cover vertically on the CH225 V3. See step (1) in Figure 8-25.

    Figure 8-25 Installing the cover

  2. Push the cover back in place on the CH225 V3. See step (2) in Figure 8-25.
Translation
Download
Updated: 2019-07-10

Document ID: EDOC1000095351

Views: 6953

Downloads: 73

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next