No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CH225 V3 Compute Node V100R001 User Guide 07

This document describes the appearance, functions, and structure of the CH225 V3 storage expansion compute node (CH225 V3 for short), and methods of installing, removing, and configuring the CH225 V3.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logical Structure

Logical Structure

This section describes the logical structure of the CH225 V3 mainboard.

Figure 2-7 shows the logical structure of the CH225 V3 mainboard.

The RAID controller card provides eight SAS ports, two of which connect to the HDD/SSD backplane. The RAID controller card determines RAID properties of the HDDs and SSDs. The HDD/SSD backplane only provides physical channels and does not process data on HDDs and SSDs.

Figure 2-7 Logical structure of the mainboard
Translation
Download
Updated: 2019-07-10

Document ID: EDOC1000095351

Views: 7875

Downloads: 74

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next