No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CH225 V3 Compute Node V100R001 User Guide 07

This document describes the appearance, functions, and structure of the CH225 V3 storage expansion compute node (CH225 V3 for short), and methods of installing, removing, and configuring the CH225 V3.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a USB Flash Drive

Installing a USB Flash Drive

This section describes the precautions and procedure for installing a USB flash drive to a CH225 V3.


Remove a USB flash drive in either of the following scenarios:

  • The USB flash drive is faulty.
  • The USB flash drive needs to be replaced with a newer model.

Figure 8-72 shows the position of the USB flash drive on the CH225 V3.

Figure 8-72 Position of the USB flash drive




Data preparation is not required for this operation.


Electrostatic discharge (ESD) gloves.


Spare USB flash drive.


  1. Take the spare USB flash drive out of its ESD bag.
  2. Insert the USB flash drive into the connector, as shown in Figure 8-73.

    Figure 8-73 Installing a USB flash drive

Updated: 2019-07-10

Document ID: EDOC1000095351

Views: 7674

Downloads: 74

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next