No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Multicast

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document describes the principles and configurations of IP multicast, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the Trap Function for a Specified Module

Enabling the Trap Function for a Specified Module

Context

On a multicast device managed by the network management system (NMS), you can enable the trap function for a specified module to monitor events of the specified protocol.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. You can choose one or multiple operations to perform:

    • Run the snmp-agent trap enable feature-name igmp [ trap-name { glblimit | iflimit | iflimitclr | inslimit | joingrp | leavegrp | hwmgmdgmptotallimitclear | hwmgmdgmpgloballimitclear } ] command to enable the Internet Group Management Protocol (IGMP) trap function.

      By default, the IGMP trap function is disabled.

    • Run the snmp-agent trap enable feature-name mld [ trap-name { glblimit | iflimit | iflimitclr | inslimit | joingrp | leavegrp | hwmgmdgmptotallimitclear | hwmgmdgmpgloballimitclear } ] command to enable the MLD trap function.

      By default, the MLD trap function is disabled.

    • Run the snmp-agent trap enable feature-name msdp [ trap-name { establish | backward } ] command to enable the Multicast Source Discovery Protocol (MSDP) trap function.

      By default, the MSDP trap function is disabled.

    • Run the snmp-agent trap enable feature-name pim [ trap-name { neighbor-loss | invalid-join-prune | rp-mapping-change | interface-election | invalid-register | new-neighbor | mrt-limit | hwpimmrtlimitclear } ] command to enable the Protocol Independent Multicast (PIM) trap function.

      By default, the PIM trap function is disabled.

    • Run the snmp-agent trap enable feature-name pim-std [ trap-name { pimneighborloss | piminvalidregister | piminvalidjoinprune | pimrpmappingchange | piminterfaceelection } ] command to enable the public PIM trap function.

      By default, the public PIM trap function is disabled.

Translation
Download
Updated: 2019-06-12

Document ID: EDOC1000097181

Views: 20800

Downloads: 401

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next