No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Multicast

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document describes the principles and configurations of IP multicast, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing Statistics About IPv6 PIM Control Packets

Clearing Statistics About IPv6 PIM Control Packets

Context

If an interface has been forwarding multicast packets for a time after IPv6 PIM is enabled, the router stores statistics about a large number of control messages. You can clear the statistics about IPv6 PIM control packets so that the router can collect new statistics. This operation does not affect normal running of IPv6 PIM.

Statistics about IPv6 PIM control messages on an interface cannot be restored after you clear them. Confirm your action before clearing the statistics.

Procedure

  • To clear statistics about IPv6 PIM control messages on an interface, run the reset pim ipv6 control-message counters [ interface interface-type interface-number ] command in the user view.
Translation
Download
Updated: 2019-06-12

Document ID: EDOC1000097181

Views: 20197

Downloads: 401

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next