No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Multicast

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document describes the principles and configurations of IP multicast, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Parameters for Controlling the MFIB

Configuring Parameters for Controlling the MFIB

Context

The multicast forwarding information base (MFIB) of a device controls forwarding of multicast packets. You can control forwarding of multicast packets by configuring the parameters for controlling the MFIB

Pre-configuration Tasks

Before configuring the parameters for controlling the multicast forwarding table, complete the following tasks:

  • Configure a unicast routing protocol to ensure normal unicast routing on the network.
  • Run the multicast routing-enable command in the system view to enable Layer 3 multicast routing globally.

Configuration Process

The following configuration tasks can be performed in any sequence.

Translation
Download
Updated: 2019-06-12

Document ID: EDOC1000097181

Views: 20206

Downloads: 401

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next