Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IPv6 Multicast Route Management Configuration
This chapter explains the IPv6 multicast protocols that a router can use to control multicast routing and forwarding, by exchanging messages between the control plane and the forwarding plane.
- Introduction to IPv6 Multicast Route Management
- Principles
- Configuration Task Summary
- Configuration Notes
- Default Configuration
- Configuring IPv6 Multicast Load Splitting
- Configuring an IPv6 Multicast Boundary
- Configuring the Parameters for Controlling the IPv6 Multicast Forwarding Table
- Maintaining IPv6 Multicast Routes
- Configuration Examples
- Common Misconfigurations
Previous
