No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Multicast

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document describes the principles and configurations of IP multicast, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Task Summary

Configuration Task Summary

After IPv6 PIM is configured, multicast data can be routed and forwarded on an IPv6 network. IPv6 PIM includes multiple modes that apply to different scenarios. Table 5-1 lists IPv6 PIM configuration tasks.

Table 5-1  IPv6 PIM configuration tasks
Task Description

Configuring IPv6 PIM-DM

IPv6 PIM-DM uses the ASM model to provide multicast services. The configuration is simple, but multicast data is periodically broadcast. IPv6 PIM-DM applies to the small LAN where members are densely distributed.

Configuring IPv6 PIM-SM

IPv6 PIM-SM uses the ASM and SSM models to provide multicast services. In the ASM model, a multicast distribution tree (MDT) is set up by receivers actively joining the multicast group. IPv6 PIM-SM needs to maintain an RP, set up an RPT, and register with a multicast source. The ASM model applies to the large network where members are widely distributed. In the SSM model, IPv6 PIM-SM sets up an SPT between a multicast source and members and does not need to maintain an RP, set up an RPT, or register with the multicast source. The SSM model applies to the network where users know the multicast source location and directly order multicast data from a specified multicast source.

Translation
Download
Updated: 2019-06-12

Document ID: EDOC1000097181

Views: 21228

Downloads: 403

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next