No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Multicast

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document describes the principles and configurations of IP multicast, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing Statistics About PIM Control Packets

Clearing Statistics About PIM Control Packets


If a PIM-enabled interface has been forwarding multicast packets for a time, the system stores statistics on a large number of control messages. To collect new statistics about PIM control messages, clear the existing statistics. This operation does not affect running of PIM.

Statistics about PIM control messages on an interface cannot be restored after you clear them. Confirm your action before clearing the statistics.


  • To clear statistics about PIM control messages on an interface, run the reset pim [ vpn-instance vpn-instance-name | all-instance ] control-message counters [ interface interface-type interface-number ] command in the user view.
Updated: 2019-06-12

Document ID: EDOC1000097181

Views: 21143

Downloads: 403

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next