No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Multicast

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document describes the principles and configurations of IP multicast, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling IGMP

Enabling IGMP

Context

IP multicast routing is the prerequisite for all the multicast functions. Enable IP multicast routing before configuring any multicast protocol.

To configure IGMP functions on the router, first enable IGMP on interfaces connected to group members.

Procedure

  • Enabling IGMP in the public network instance
    1. Run:

      system-view

      The system view is displayed.

    2. Run:

      multicast routing-enable

      IP multicast routing is enabled.

      By default, the IP multicast routing function is disabled.

    3. Run:

      interface interface-type interface-number

      The interface view is displayed.

    4. Run:

      igmp enable

      IGMP is enabled on the interface.

      By default, IGMP is disabled on an interface.

  • Enabling IGMP in a virtual private network (VPN) instance

    A VPN instance must exist before you enable IGMP in the VPN instance.

    1. Run:

      system-view

      The system view is displayed.

    2. Run:

      ip vpn-instance vpn-instance-name

      The VPN instance view is displayed.

    3. Run:

      multicast routing-enable

      IP multicast routing is enabled.

      By default, the IP multicast routing function is disabled.

    4. Run:

      quit

      Return to the system view.

    5. Run:

      interface interface-type interface-number

      The interface view is displayed.

    6. Run:

      ip binding vpn-instance vpn-instance-name

      The interface is bound to a specified VPN instance.

      By default, an interface is a public network interface that is not associated with any VPN instance.

    7. Run:

      igmp enable

      IGMP is enabled on the interface.

      By default, IGMP is disabled on an interface.

Translation
Download
Updated: 2019-06-12

Document ID: EDOC1000097181

Views: 21543

Downloads: 403

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next