No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Multicast

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document describes the principles and configurations of IP multicast, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing IPv4 Multicast VPN Statistics

Clearing IPv4 Multicast VPN Statistics

To clear IPv4 multicast VPN statistics, run the following reset command in the user view.


Statistics about group switching messages will be all deleted after you run the reset multicast-domain control-message counters command. Exercise caution when running the command.


  • To clear IPv4 multicast VPN statistics, run the reset multicast-domain { vpn-instance vpn-instance-name | all-instance } control-message counters command in the user view.
Updated: 2019-06-12

Document ID: EDOC1000097181

Views: 21321

Downloads: 403

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next