No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Multicast

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document describes the principles and configurations of IP multicast, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Longest Match for Multicast Route Selection

Configuring Longest Match for Multicast Route Selection

Context

By default, a router selects reverse path forwarding (RPF) routes based on route preference. If you change the RPF check policy to longest match, the router compares mask lengths of routes to select an RPF route, and compares route preference when multiple routes have the longest mask length.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    multicast longest-match

    The longest match rule is applied for route selection.

Translation
Download
Updated: 2019-06-12

Document ID: EDOC1000097181

Views: 18149

Downloads: 399

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next