No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Multicast

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document describes the principles and configurations of IP multicast, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring MSDP Anycast RP

Configuring MSDP Anycast RP

Context

Anycast rendezvous point (RP) supports the configuration of several RPs with the same address in a PIM-SM domain. MSDP peer relationship is established between these RPs so that the multicast source can register to the closest RP and the multicast receiver can join the closest RP.

Pre-configuration Tasks

Enable Protocol Independent Multicast Sparse Mode (PIM-SM) function on all routers in the PIM-SM domain, without configuring RP.

Configuration Process

Perform configuration tasks in the listed sequence.

Translation
Download
Updated: 2019-06-12

Document ID: EDOC1000097181

Views: 20605

Downloads: 401

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next