No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Multicast

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document describes the principles and configurations of IP multicast, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring the Running Status of IPv4 Multicast VPN

Monitoring the Running Status of IPv4 Multicast VPN

During the routine maintenance of the IPv4 multicast VPN, you can run the display commands in any view to know the running of the IPv4 multicast VPN.

Context

In routine maintenance, you can run the following commands in any view to check the running status of IPv4 Multicast VPN.

Procedure

  • Run the display multicast-domain vpn-instance vpn-instance-name share-group [ local | remote ] command in any view to check information about Share-Group of a specified VPN instance in an MD.
  • Run the following commands in any view to check information about Switch-Group received by a specified VPN instance in an MD.

    • display multicast-domain vpn-instance vpn-instance-name switch-group receive brief

    • display multicast-domain vpn-instance vpn-instance-name switch-group receive [ active | group group-address | sender source-address | vpn-source-address [ mask { source-mask-length | source-mask } ] | vpn-group-address [ mask { group-mask-length | group-mask } ] ] *

  • Run the display multicast-domain vpn-instance vpn-instance-name switch-group send [ group group-address | reuse interval | vpn-source-address [ mask { source-mask-length | source-mask } ] | vpn-group-address [ mask { group-mask-length | group-mask } ] ] * command in any view to check information about the Switch-Group sent to a specified VPN instance in an MD.
  • Run the display multicast-domain { vpn-instance vpn-instance-name | all-instance } control-message counters command in any view to check the statistics about sent and received MDT switch messages in a specified VPN instance or all VPN instances.
  • Run the display multicast-domain { vpn-instance vpn-instance-name | all-instance } invalid-packet command in any view to check the statistics about invalid MDT switch messages received by a device.
Translation
Download
Updated: 2019-06-12

Document ID: EDOC1000097181

Views: 17946

Downloads: 399

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next