No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Multicast

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document describes the principles and configurations of IP multicast, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Basic IGMP Functions

Configuring Basic IGMP Functions

Context

Hosts can connect to multicast networks and receive multicast packets after basic IGMP configuration is complete on interfaces connected to user networks.

Pre-configuration Tasks

Before configuring IGMP basic functions, configure a unicast routing protocol to ensure that multicast devices have reachable unicast routes to each other.

Configuration Process

Enabling IGMP and Configuring the IGMP Version are mandatory. The other configuration tasks are optional.

Translation
Download
Updated: 2019-06-12

Document ID: EDOC1000097181

Views: 20793

Downloads: 401

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next