No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Multicast

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document describes the principles and configurations of IP multicast, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting Multicast Forwarding Entries and Routing Entries

Deleting Multicast Forwarding Entries and Routing Entries

Context

After confirming that multicast forwarding entries and routing entries can be deleted, run the reset commands in the user view to delete the entries.

Deleting multicast forwarding entries or routing entries may cause interruption of multicast data transmission. When you delete entries from the multicast routing table of the public network instance, multicast forwarding entries in the public network instance or VPN instance are also deleted.

Procedure

  • Run either of the following commands in the user view to delete multicast forwarding entries:

    • reset multicast [ vpn-instance vpn-instance-name | all-instance ] forwarding-table all

    • reset multicast [ vpn-instance vpn-instance-name | all-instance ] forwarding-table { group-address [ mask { group-mask | group-mask-length } ] | source-address [ mask { source-mask | source-mask-length } ] | incoming-interface { interface-type interface-number | register } } *

  • Run either of the following commands in the user view to delete multicast routing entries:

    • reset multicast [ vpn-instance vpn-instance-name | all-instance ] routing-table all

    • reset multicast [ vpn-instance vpn-instance-name | all-instance ] routing-table { group-address [ mask { group-mask | group-mask-length } ] | source-address [ mask { source-mask | source-mask-length } ] | incoming-interface { interface-type interface-number | register } } *

Translation
Download
Updated: 2019-06-12

Document ID: EDOC1000097181

Views: 17996

Downloads: 399

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next