No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF/6/JOIN_MULGRP_FAIL

OSPF/6/JOIN_MULGRP_FAIL

Message

OSPF/6/JOIN_MULGRP_FAIL:Failed to join the multicast group. (MulticastGroup Address=[IPADDR], ReturnValue=[STRING], InterfaceNetworkIndex=[ULONG], PhysicalIndex=[ULONG], InterfaceName=[STRING])

Description

The OSPF interface failed to join the multicast group.

Parameters

Parameter Name Parameter Meaning
Multicast group address Indicates the multicast group address.
ReturnValue Indicates the returned value.
InterfaceNetworkIndex Indicates the index of the network where an interface resides.
PhysicalIndex Indicates the index of a physical interface.
InterfaceName Indicates the name of an interface.

Possible Causes

Failed to add an interface to the multicast group.

Procedure

  1. Check whether the multicast function on the interface was available.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 71968

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next