Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
BGP/4/SPEC_RT_EXCD_THLD
BGP/4/SPEC_RT_EXCD_THLD
Message
BGP/4/SPEC_RT_EXCD_THLD:The number of BGP [STRING]
routes reached the threshold value [ULONG].
Description
The ratio of BGP routes of a specified type to the
maximum number that is allowed exceeded the alarm threshold.
Parameters
Parameter Name
Parameter Meaning
[route-type]
BGP route type:
IPv4: IPv4 routes, including IPv4 public network and IPv4 VPN
routes
IPv4 Public: IPv4 public network routes
IPv4 VRF: IPv4 VPN routes
IPv6: IPv6 routes, including IPv6 public network and IPv6 VPN
routes
IPv6 Public: IPv6 public network routes
IPv6 VRF: IPv6 VPN routes
L2AD: BGP L2VPN-AD routes
[threshold-value]
Alarm threshold for the number of BGP routes
of a specified type
Possible Causes
The ratio of BGP routes of a specified type to the
maximum number that is allowed exceeded the alarm threshold.
Procedure
1. Check the network topology and configurations to determine
whether this alarm is caused by configuration or topology errors or
whether all the routes are necessary.
If all the routes are necessary, determine whether to implement
capacity expansion and contact technical support personnel.