No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WWAN/5/WWAN_RSSI_WEAK

WWAN/5/WWAN_RSSI_WEAK

Message

WWAN/5/WWAN_RSSI_WEAK: The 2G/3G signal of interface [interface-name] become weak, RSSI= [RSSI] dBm.

Description

The strength of 3G signals received by a cellular interface became weak.

Parameters

Parameter Name Parameter Meaning
[interface-name] Cellular interface name.
[RSSI] Received signal strength indicator (RSSI).

Possible Causes

On a WCDMA or CDMA2000 network, if the strength of received 3G signals is not greater than the SINR threshold 10 consecutive times, and the signal strength becomes weak, the device records this log.

By default, the RSSI threshold used to determine the 3G signal strength is -89 dBm.

Procedure

  1. Check whether the network environment is normal.
  2. Check whether the antenna is properly connected.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 80996

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next