No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



RIP/3/LEAVE_MCST_GRP_F: Leaving RIP multicast group is unsuccessful. Total [number] occurrences since [date] [time]. (ProcessId=[ULONG], ErrorCode=[LONG])


Failed to leave the RIP multicast group on the interface.


Parameter Name Parameter Meaning
[number] Indicates the number of failed attempts to leave a RIP multicast group on an interface.
[date] Indicates the date when the last route left the RIP multicast group.
[time] Indicates the time when the last route left the RIP multicast group.
ProcessId Indicates the process ID.
ErrorCode Indicates the error code.

Possible Causes

Failed to leave the RIP multicast group on the interface.


  1. Collect log information and configuration information, and then contact technical support personnel.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 133540

Downloads: 189

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next