No relevant resource is found in the selected language.
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
BGP/4/ROUTEADD_REACHLMT
BGP/4/ROUTEADD_REACHLMT
Message
BGP/4/ROUTEADD_REACHLMT:Failed to update
the route in the [flag] instance because the number of routes reached
the maximum. (InstanceId=[USHORT], AFI=[USHORT], SAFI=[USHORT])
Description
Failed to update the routes in the instance because
the number of routes reached the maximum value.
Parameters
Parameter Name
Parameter Meaning
flag
Flag of a BGP address family: public or VPN
InstanceId
Instance ID
AFI
Address family information (AFI)
SAFI
Sub-address family information (SAFI)
Possible Causes
Failed to add BGP routes to the routing table because
the number of routes in the routing table exceeded the maximum value.
Procedure
Check the topology and the configuration of the network,
and check whether excessive routes are caused by the requirements
of actual applications or incorrect topology configuration.
If the excessive routes are caused by the requirements
of actual applications, extend the device.