No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RM/4/PFXNUM_EXCD_WARN

RM/4/PFXNUM_EXCD_WARN

Message

RM/4/PFXNUM_EXCD_WARN:The number of prefixes in [vpn-instance-name] was [current-number], which exceeded the alarm threshold [threshold]. (InstanceId=[ULONG], MaxPrefixLimit=[ULONG])

Description

This log message is displayed when the number of route prefixes exceeds the alarm threshold but does not exceed the permitted maximum value and a new route is to be added. The interval for displaying this log message can be set through a command.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[current-number] Indicates the number of current route prefixes.
[threshold] Indicates the alarm threshold for the number of route prefixes.
InstanceId Indicates the instance ID.
MaxPrefixLimit Indicates the permitted maximum number of route prefixes.

Possible Causes

This log message is displayed when the number of route prefixes exceeds the alarm threshold but does not exceed the permitted maximum value and a new route is to be added. The interval for displaying this log message can be set through a command.

Procedure

  1. Check whether the permitted maximum number of route prefixes or alarm threshold needs to be increased.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 80667

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next