No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ARPLINK/6/ARPLINK_DELETE

ARPLINK/6/ARPLINK_DELETE

Message

ARPLINK/6/ARPLINK_DELETE:The IP address of the interface has been changed, and the ARP link has been deleted. (InterfaceName=[STRING]).

Description

The ARP status-detect function is disabled when the IP address newly assigned to the interface and the IP address of ARP status-detect are in different network segments, or the IP addresses are the same.

Parameters

Parameter Name Parameter Meaning
InterfaceName Indicates the name of an interface.

Possible Causes

1. Enable the ARP status-detect function and assign an IP address to an interface. Then assign a new IP address to the interface. If you find that the ARP status-detect function is disabled, possible causes are as follows:

(1) The IP address newly assigned to the interface and the IP address of ARP status-detect are in different network segments.

(2) The IP address newly assigned to the interface and the IP address of ARP status-detect are the same.

2. Enable the ARP status-detect function on an interface, and then assign an IP address to the interface. If you find that the ARP status-detect function is disabled, possible causes are as follows:

(1) The IP address newly assigned to the interface and the IP address of ARP status-detect is in different network segments.

(2) The IP address newly assigned to the interface and the IP address of ARP status-detect are the same.

Procedure

  1. The IP address of ARP status-detect is the IP address of the interface on a directly connected device or on a device that is connected through a switch.
    1. If the IP address newly assigned to the interface and the IP address of ARP status-detect are in different network segments, check whether the IP address of the remote interface is newly assigned, and whether the status of the remote interface need be detected any more. If the status of the remote interface need be detected, reconfigure the ARP status-detect function; if the status of the remote interface need not be detected, no configuration is needed.
    2. If the IP address newly assigned to the interface and the IP address of ARP status-detect are the same, check whether the subnet mask of the newly assigned IP address is changed. Then check whether the IP address of the remote interface is newly assigned, and whether the status of the remote interface need be detected any more. If the status of the remote interface need be detected, reconfigure the ARP status-detect function; if the status of the remote interface need not be detected, no configuration is needed.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 92596

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next