No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



FW-LOG/5/STREAM_SYSNORMAL:system number of [proto] session is normal: [session-count]


The number of connections initiated globally was restored to the allowed range.


Parameter Name Parameter Meaning
[proto] Indicates the protocol type of connections. The value can be TCP, UDP, and ICMP.
[session-count] Indicates the number of connections established by a protocol.

Possible Causes

If the traffic monitoring log was enabled, the firewall recorded the log when the number of connections initiated globally was restored to the allowed range.


  1. Check logs to find that the number of connections initiated globally has been restored to the allowed range. You can change the number if necessary.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 136037

Downloads: 189

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next