No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RM/4/RT6_NUM_EXCD_WARN

RM/4/RT6_NUM_EXCD_WARN

Message

RM/4/RT6_NUM_EXCD_WARN:The number of routes in IPv6 [vpn-instance-name] was [current-number], which exceeded the alarm threshold [threshold-value]. (InstanceId=[ULONG], MaximumRouteLimit=[ULONG])

Description

The number of routes for the specified IPv6 private network instance exceeded the upper limit of the trap threshold.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of an IPv6 VPN instance.
[threshold-value] Indicates the value of the trap threshold.
InstanceId Indicates the ID of an IPv6 VPN instance.
MaximumRouteLimit Indicates the maximum number of routes.

[current-number]

Indicates the actual number of routes.

Possible Causes

The number of routes for the specified IPv6 private network instance exceeded the upper limit of the trap threshold.

Procedure

  1. Run the display ipv6 routing-table [ vpn-instance vpn-instance-name ] statistics command to check the total number and types of routes in this IPv6 VPN instance.
  2. Analyze the source of each route and check whether the number of current routes in the IPv6 VPN instance meets the requirement.

    • If so, go to Step 4.
    • If not, go to Step 3.

  3. Delete unnecessary private routes, and then check whether the number of routes still reaches or exceeds the alarm threshold.

    • If so, go to Step 5.
    • If not, go to Step 6.

  4. Enter the IPv6 VPN instance view and run the display this command to check the configuration of routing-table limit to check whether the set alarm threshold of private routes is proper.

    • If so, go to Step 5.
    • If not, run the routing-table limit number { alert-percent | simply-alert } command to reconfigure a proper alarm threshold. Then, go to Step 6.

  5. Collect log information and configuration information, and then contact technical support personnel.
  6. End.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 98401

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next