Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ISIS/4/PEER_DOWN_LOW_MEMORY
ISIS/4/PEER_DOWN_LOW_MEMORY
Message
ISIS/4/PEER_DOWN_LOW_MEMORY:ISIS [process-id] neighbor [neighbor] was Down on interface [interface-name] because memory was not enough. The Hello packet was received at [hello-time] last time; the maximum interval for sending Hello
packets was [max-interval]; the local router sent [send-number] Hello packets and received [receive-number] packets; the type of the Hello packet was [packet-type]; CPU usage was [cpu-percent]%.
Description
The IS-IS neighbor went Down on the interface because the memory was insufficient.
Parameters
Parameter Name
Parameter Meaning
[process-id]
Indicates the ID of an IS-IS process.
[neighbor]
Indicates the system ID of a neighbor.
[interface-name]
Indicates the name of an interface.
[hello-time]
Indicates the time when a Hello packet was received last time.
[max-interval]
Indicates the maximum interval for sending Hello packets.
[send-number]
Indicates the number of Hello packets that were sent.
[receive-number]
Indicates the number of Hello packets that were received.
[packet-type]
Indicates the type of the Hello packet. The type can be
P2P: indicates the P2P Hello packet.
Lan Level-1: indicates the Hello packet in the Level-1 broadcast network.
Lan Level-2: indicates the Hello packet in the Level-2 broadcast network.
[cpu-percent]
Indicates the CPU usage.
Possible Causes
The insufficient memory caused the IS-IS neighbor to become Down.
Procedure
Run the display diagnostic-information command and save the command output; contact technical support personnel.