No relevant resource is found in the selected language.
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MLD/6/IF_LIMIT
MLD/6/IF_LIMIT
Message
MLD/6/IF_LIMIT:In VPN instance "[vpn-instance-name]",
the number of existed MLD group memberships exceeded the limit on
this interface. (FlCode=[STRING][ULONG])
Description
The number of MLD entries on the current interface
exceeded the upper limit.
Parameters
Parameter Name
Parameter Meaning
[vpn-instance-name]
Indicates the name of a VPN instance.
FlCode
Indicates the name of the source code file and
the line number of this log message.
Possible Causes
In the case that the current interface was configured
with the MLD limit, the number of MLD entries on the interface exceeded
the limit.
Procedure
Run the limit command in the system view to adjust the maximum number of
MLD entries that can be created.