No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



IFNET/4/BWRATE_OUT_RISING:Interface output flow bandwidth usage exceeded the log threshold. (Interface=[interface], BandWidthUsage=[usage], LogThreshold=[threshod], InterfaceName=[interfacename])


Bandwidth usage for traffic sent by an interface exceeded the configured threshold for generating a log about bandwidth usage.


Parameter Name Parameter Meaning
Interface Interface index
BandWidthUsage Current bandwidth usage
LogThreshold Configured threshold
InterfaceName Interface name

Possible Causes

Bandwidth usage for traffic sent by an interface exceeds the configured threshold of the bandwidth usage upper limit.


  1. If the log named BWRATE_OUT_RESUME is not displayed for a long time after the preceding log is displayed, expand the device.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 136864

Downloads: 189

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next