Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
POE/6/PDPWROFF
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| [STRING] | Indicates the name of the interface connected to the PD. |
Possible Causes
1.
The system time was within the power-off period.
2.
The PD was disconnected from the interface.
3.
The system power was insufficient.
4.
The PD was powered off manually.
Procedure
- The processing methods are as follows:
- If the system time was within the power-off period, this log message is informational only and no action is required.
- If the PD was disconnected from the interface, this log message is informational only and no action is required.
- If the system power was insufficient, remove the unneeded PDs.
- If the PD was powered off manually, this log message is informational only and no action is required.
If the log is not generated for the preceding reasons, contact Huawei technical support engineers.