No relevant resource is found in the selected language.
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PPPoE/4/LINK_STATE
PPPoE/4/LINK_STATE
Message
PPPoE/4/LINK_STATE:The line protocol [line-protocol] on the interface [interface-name] has entered the [state] state.
Description
The online and offline status of a PPPoE user changed.
Parameters
Parameter Name
Parameter Meaning
[line-protocol]
Link layer protocol name.
[interface-name]
Interface name.
[state]
Link layer protocol status:
1. UP: indicates that the link layer protocol status of the interface is Up.
2. DOWN: indicates that the link layer protocol status of the interface is Down.
Possible Causes
The status of a PPPoE user changed.
Procedure
This log message is informational only, and no action is required. You can run the pppoe-server log enable command to enable logging for status change of PPPoE users.