No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ADP-IPSEC/4/DPD_Report_Fail

ADP-IPSEC/4/DPD_Report_Fail

Message

ADP-IPSEC/4/DPD_Report_Faill: Failed to report on-demand DPD messages, error code: [ULONG].

Description

The IPSec module failed to process on-demand DPD messages.

Parameters

Parameter Name Parameter Meaning
error code Indicates the returned error code.

Possible Causes

After on-demand DPD was enabled, the IPSec module failed to process on-demand DPD messages.

Procedure

  1. Enable DPD again.
  2. Check whether the policy is configured correctly.
  3. If so, collect log messages and contact technical support personnel.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 66456

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next