No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2V/5/CCCVC_UP

L2V/5/CCCVC_UP

Message

L2V/5/CCCVC_UP:The status of the CCC VC turned UP. (CccName=[STRING], InterfaceName=[STRING], Reason=[STRING])

Description

The CCC VC went Up.

Parameters

Parameter Name Parameter Meaning
CccName Indicates the name of the CCC.
InterfaceName Indicates the name of the interface.
Reason Indicates the cause:

1. Invalid reason type

2. VC was created

3. VC was deleted

4. LDP session was Down

5. LDP session was Up

6. Same LDP mapping was received with different label and MTU

7. Same LDP mapping was received with matching interface parameters

8. LDP mapping was received with mismatching interface parameters

9. LDP mapping was received with unpass Cbit check

10. LDP mapping was received with unpass PW loop check

11. New LDP mapping was received

12. New LDP mapping was received but remote Vc or local Vc is Down

13. LDP withdrawn message was received

14. LDP release message was received

15. LDP request message was received

16. LDP GR ended processing

17. RSVP message was received

18. Interface was Up

19. Interface was Down

20. Interface encapsulation changed

21. Refresh

22. Download again

23. Tunnel was Up

24. Tunnel was Down

25. VC state changed when New RLB was received

26. RLB was Deleted

27. VC was created or connected to another remote CE

28. Outgoing interface was unavailable

29. Outgoing interface was available

30. LDP notification message was forwarded

31. LDP notification message was not forwarded

32. PW was recreated

33. Download FTN & ILM for Eth-Trunk

34. AC OAM fault detection was disabled

35. Remote AC fault

36. Remote AC fault was resumed

37. Local AC fault

38. Local AC fault was resumed

39. Remote PSN fault

40. Remote PSN fault was resumed

41. Local PSN fault

42. Local PSN fault was resumed

43. BFD for PW status changed to Down

44. BFD for PW status changed to Up

45. BFD for PW status changed to ADMIN DOWN

46. BFD for PW was disabled

47. Manual set was enabled

48. Manual set was disabled

49. Delay timed out

50. Resume timed out

Possible Causes

The VC went Up.

Procedure

  1. Identify the cause of the VC status change.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 82569

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next