No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



OSPF/6/TRAP_VIR_INTF_RETX:Virtual interface has retransmitted. (ProcessId=[USHORT], RouterId=[IPADDR], Area=[IPADDR], Neighbor=[IPADDR], PacketType=[ULONG], LsdbAreaId=[IPADDR], LsdbType=[ULONG], LsdbLsId=[IPADDR], LsdbRouterId=[IPADDR])


Packets were resent through the virtual interface.


Parameter Name Parameter Meaning
ProcessId Indicates the ID of an OSPF process.
RouterId Indicates the ID of a router.
Area Indicates the ID of an area.
Neighbor Indicates the IP address of a neighbor.
PacketType Indicates the packet type.
LsdbAreaId Indicates the area ID of an LSA in the LSDB.
LsdbType Indicates the type of an LSA in the LSDB.
LsdbLsId Indicates the ID of an LSA in the LSDB.
LsdbRouterId Indicates the router ID in the LSDB.

Possible Causes

Packets were resent through the virtual interface.


  1. This log message is informational only, and no action is required.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 127536

Downloads: 188

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next