No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IFNET/6/NTF_STATE_CHANGE

IFNET/6/NTF_STATE_CHANGE

Message

IFNET/6/NTF_STATE_CHANGE:The OAM Manager interface fault notify state change. (InterfaceName=[STRING], State=[STRING])

Description

The status change was notified after the OAM manager became faulty.

Parameters

Parameter Name Parameter Meaning
InterfaceName indicates the interface name.
State indicates the status.

Possible Causes

After the oam notify command was run, the OAM manager received the message that APP status changed.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 82789

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next