No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



RSVP/6/RSB_CLEAN_TIMEOUT:The cleanup timer of RSB expired. (IngressLsrId=[IPADDR], TunnelId=[USHORT], EgressLsrId=[IPADDR], LspId=[USHORT], LastRecRefreshTime [ULONG]:[ULONG]:[ULONG](Hour:Minute:Second), CleanupTime=[ULONG](Second))


The RSB's cleanup timer expired.


Parameter Name Parameter Meaning
IngressLsrId Indicates the LSR ID of the ingress in the Resv message.
TunnelId Indicates the ID of a tunnel.
EgressLsrId Indicates the LSR ID of the egress in the Resv message.
LspId Indicates the LSP ID.
LastRecRefreshTime Indicates the last time when receiving a Resv Refresh message.
CleanupTime Indicates the timeout period of the RSB cleanup timer

Possible Causes

The RSB failed to be updated, causing its cleanup timer to expire. For example, between two directly-connected devices, if one directly-connected interface of a device fails, the device cannot send a Resv Refresh message. As failing to receiving the Resv Refresh message, the other device deletes the TE tunnel after the RSB cleanup timer expires.


  1. Check whether there is an operation that shuts down the interface or interrupts services.
  2. Collect log information and configuration information, and then contact technical support personnel.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 136042

Downloads: 189

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next