No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
NATPT/4/DPATMAP_RECHMAX

NATPT/4/DPATMAP_RECHMAX

Message

NATPT/4/DPATMAP_RECHMAX:The amount of destination port address mappings has reached the upper limit, some mappings need to be deleted before new ones can be added.

Description

The destination port address mapping table was full. Delete some old address mappings so as to inject new address mappings.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

The destination port address mappings table was full. Delete some old address mappings so as to inject new address mappings.

Procedure

  • This log message indicates a normal situation, and no action is required.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 81025

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next