Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WLAN/3/WLAN_LOG_USER30
Message
WLAN/3/WLAN_LOG_USER(l)[0]: [WLAN_STA_INFO_AP_ASSOCIATE] ACMAC: [STRING1]; ACNAME: [STRING2]; APMAC: [STRING3]; APNAME: [STRING4]; USER: [STRING5]; MAC: [STRING6]; TIME: [ULONG1]; ZONE:UTC [STRING7] ERRCODE: [ULONG2]; RESULT: FailType is Status code, other reason
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| [STRING1] | MAC address of an AC. |
| [STRING2] | AC system name. |
| [STRING3] | MAC address of an AP. |
| [STRING4] | AP system name. |
| [STRING5] | STA name. |
| [STRING6] | MAC address of the STA. |
| [ULONG1] | System time. |
| [STRING7] | Time zone and DST. |
| [ULONG2] | Failure/Status error code. |
Possible Causes
Cause:
A STA failed to go online due to other
causes, except the following:
- The STA QoS configuration was different from the AP QoS configuration.
- The STA rate is not supported by the AP.
- The number of STAs associated with the AP reached the upper limit.
- The authentication algorithm requested by the STA was not supported by the AP.