No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



OSPF/6/BAD_LSA: Received the first bad LSA within an interval of 15 minutes. (ErrorType=[STRING], ErrorInformation=[STRING], ProcessId=[USHORT], InterfaceName=[STRING], LsaType=[USHORT], AdvertisingRouter=[IPADDR], LinkStateId=[IPADDR], Count=[ULONG], LsaContent=[STRING])


The first incorrect LSA was received within 15 minutes. Each packet error type has a specific suppression measure, and suppression measures do not affect each other.


Parameter Name Parameter Meaning
ErrorType Packet error type
ErrorInformation Key packet error information
ProcessId Process ID
InterfaceName Interface name
LsaType LSA type
AdvertisingRouter LSA advertising router
LinkStateId Link state ID
Count Number of error packets (The number is reset after being displayed. This means that the number of incorrect packets displayed in the log only indicates the number of incorrect packets generated since the last time the number of incorrect packets was displayed.)
LsaContent LSA contents, in the hexadecimal format.

Possible Causes

This log is displayed if the router receives an incorrect LSA (for example, the checksum of the LSA is incorrect). Incorrect LSAs of the same type are suppressed for 15 minutes.


  1. Check the device that sends the incorrect LSAs.
  2. Contact contact technical support personnel.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 126817

Downloads: 188

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next