Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
AM/4/IPALLOCFAIL
Message
AM/4/IPALLOCFAIL: Failed to allocate an IP address. (PoolName=[STRING], MacAddress=[STRING], Reason=[STRING])
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
PoolName |
Indicates the address pool name. |
MacAddress |
Indicates the client MAC address. |
Reason |
Indicates the reason why IP addresses fail to
be assigned that include:
|
Possible Causes
- The IP addresses in the address pool are used up.
- The address pool is locked.
- The system is abnormal.
Procedure
- Rectify the fault according to the reason:
- The IP addresses in the address pool are used up, run the network ip-address [ mask { mask | mask-length } ] command in the address pool view or run the ip address ip-address { mask | mask-length } command in the interface view to adjust mask or mask-length to extend the available address range of the address pool.
- If the address pool is locked, run the undo lock command in the address pool view to unlock the address pool after confirming the reason why the administrator locks the pool.
- If the system is abnormal, contact technical support personnel.