No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



OSPF/6/HELLO_SEND_TIMESTAMP: OSPF hello packet sending timestamp record when neighbor state leaves full or changes to down. (ProcessId=[USHORT], NeighborRouterId=[IPADDR], NeighborAreaId=[ULONG], NeighborInterface=[STRING], SendTimpstamp1=[ STRING], SendTimpstamp2=[ STRING], SendTimpstamp3=[ STRING], SendTimpstamp4=[ STRING], SendTimpstamp5=[ STRING], SendTimpstamp6=[ STRING], SendTimpstamp7=[ STRING], SendTimpstamp8=[ STRING], CurrentTimpstamp=[ STRING])


The OSPF route tasks were not scheduled in time and delayed the sending of the OSPF Hello packets. As a result, the neighbor state changed. When the neighbor state was Full, the timestamp of sending Hello packets for the last eight times in the log OSPF_NBR_DOWN_REASON was also recorded.


Parameter Name Parameter Meaning
ProcessId Process ID
NeighborRouterId Neighbor router ID
NeighborAreaId Neighbor area ID
NeighborInterface Name of an interface
SendTimpstamp1 Sending timestamp 1
SendTimpstamp2 Sending timestamp 2
SendTimpstamp3 Sending timestamp 3
SendTimpstamp4 Sending timestamp 4
SendTimpstamp5 Sending timestamp 5
SendTimpstamp6 Sending timestamp 6
SendTimpstamp7 Sending timestamp 7
SendTimpstamp8 Sending timestamp 8
CurrentTimpstamp Current timestamp

Possible Causes

In the OSPF operation process, the abnormal packet interaction caused the neighbor state to be "Full".


  1. This trap message is informational only, and no action is required.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 128130

Downloads: 189

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next