No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



IGMP/6/GLB_ENTRY:In VPN instance "[vpn-instance-name]", IGMP discarded the received report ([source-address], [group-address]) because the number of IGMP group memberships in all VPN instances reached the limit. The current statistical number of IGMP group memberships is [statistical-number]. (FlCode=[STRING][ULONG])


The received IGMP Report message was discarded because the number of IGMP entries in all instances reached the limit.


Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[source-address] Indicates the source address.
[group-address] Indicates the group address.
[statistical-number] Indicates the upper limit of the number of IGMP entries.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that IGMP limit for all instances was set, when the total number of IGMP entries in all instances reached the limit, the received IGMP Report message was discarded.


  1. If services are not affected, no action is required.
  2. If services are affected, run the igmp global limit number command in the system view to increase the maximum number of IGMP entries that can be created on the device.
  3. If increasing the maximum number is not allowed due to the processing capability limit of the system, Collect log information and configuration information, and then contact technical support personnel.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 129789

Downloads: 189

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next