No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PIM/4/CRT_SG_FAIL

PIM/4/CRT_SG_FAIL

Message

PIM/4/CRT_SG_FAIL:In VPN instance "[vpn-instance-name]", PIM-SSM failed to create the (S,G) entry in the multicast routing table. (FlCode=[STRING][ULONG])

Description

Failed to create the (S, G) entry.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

1. The multicast source was filtered out.

2. The memory was not enough.

3. The current route entries reached the upper limit.

Procedure

  1. Run the display acl { acl-number | all } command to ensure the (S, G) will not be filtered out, that is, ensure that the source address and group address will not be denied by the ACL applied to multicast.
  2. Ensure that system memory is enough.
  3. Run the display pim routing-table, display multicast routing-table, and display multicast forwarding-table commands to check the total number of PIM entries, multicast route entries and forwarding entries. Ensure that the total number does not reach the upper limit specified in the current PIM version.
  4. Collect log information and configuration information, and then contact technical support personnel.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 85937

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next