Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WLAN/4/AP_CPU_OVERLOAD
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
[STRING] |
Indicates the AP's recorded information and CPU usage, in the following format: APID=0, AP Mac=0a-0b-0c-00-05-00,CpuOccupanceRate=82 |
Procedure
- Check whether the CPU usage of the AP can be automatically
restored to the normal range.
Wait for a period of time, and then run the display ap-performance-statistic command to check whether the CPU usage is lower than 80%.
- If the CPU usage is lower than 80%, the configurations issued to the AP increased the AP's CPU usage. No action is required.
- If the CPU usage is still higher than 80%, the service traffic volume on the AP was too large or the AP was damaged. Go to step 2.
- Contact technical support personnel.