No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



LDP/4/SAMADDRESS:Received same address from different sessions. (Address=[STRING], OldPeer=[STRING], NewPeer=[STRING])


The same address from different sessions was received.


Parameter Name Parameter Meaning
Address Indicates the LSR ID of the peer.
OldPeer Indicates the LSR ID of the old peer.
NewPeer Indicates the LSR ID of the new peer.

Possible Causes

The same address from different peers was received.


  1. Run the display current-configuration command to check whether the same address is configured.
  2. Operators should check whether network attacks exist.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 127314

Downloads: 188

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next