No relevant resource is found in the selected language.
MENU
Support Documentation
AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007 Log Reference

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WWAN/5/WWAN_SINR_NORMAL

WWAN/5/WWAN_SINR_NORMAL

Message

WWAN/5/WWAN_SINR_NORMAL: The LTE signal of interface [interface-name] become normal, SINR= [SINR] dB, RSRP= [RSRP] dBm, RSRQ= [RSRQ] dB.

Only V200R007C00 supports this log.

Description

The strength of LTE signals received by a cellular interface became normal.

Parameters

Parameter Name Parameter Meaning
[interface-name] Cellular interface name.
[SINR] Signal to interference plus noise ratio (SINR).
[RSRP] Reference signal received power (RSRP).
[RSRQ] Reference signal received quality (RSRQ).

Possible Causes

On an LTE network, if the strength of received LTE signals is greater than the SINR threshold 10 consecutive times, and the signal strength becomes normal, the device records this log.

By default, the SINR threshold used to determine the LTE signal strength is 10 dB.

Procedure

  1. This log is informational only, and no action is required.
Translation
简体中文
Download
Updated: 2020-12-16

Document ID: EDOC1000097209

Views: 293248

Downloads: 238

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next
Enterprise APP

Copyright © 2021 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :